Fun to do and a great accompaniment to the classic carol
Jingle Bells, only waving to the beat. Who would have thought
that trash and junk may sound so festive?
When you need to make a musical instrument is jingle
bells ...
16 bottle caps, metal, paint, brass nails, sandpaper,
hammer and some wood chips.
First paint the face of a beautiful color metal
bottle caps. Spray paint is Quick and easy, but the
application of a paint brush is so good.
When paint is dry, use a large hammer and nails to
make a hole in the center of each lid. Have set up the cover as
in the bottle, so the rough edges are being created inside the
"bell."
The bells are set to a piece of wood, about 2 cm by 3
cm in length and 28cm. Have a good sanding the wood so they do
not have any surfaceicies rough. You can paint or varnish
'deal' if you want.
Working on one side of the handle at once, the rope
connecting two by two, the inside of a tapasfrente another.
Push a brass nail holes in the caps and provide timber.
The first set of bells 5cm away from the final. Do not
hammer the nail on the head too far into the wood. The bells
need to travel freely within the nail and clatter together.
The second group8.5cm could be out of the final.
The third group should be 12 cm from the end.
Now turn the handle to attach bells to the other
side. Use scraps of wood to hold each end of the stick so it is
evidentefuera work. Otherwise, the bells of sewage that has
already connected.
Add bells in pairs in the same way as it did on the
other side, but this time the first set of bells 1.5cm off the
end. Add Other sets of bells so that the level of the
bells on the other side of the
handle.
Then turn the handle to attach the other set of
bells. Once again the use of wood chips to hold the handle.
And there you have it, a series of bells ringing.
Young children should be supervised when playing the melody
bells.
If it is difficult to bottle caps, you could ask an
adult to a home or at the bar, notare using the lids. You could
also perhaps a brewery request some bottle caps. Alternatively,
look in the department of enology or Boots Wilkinsons for new
bottle caps.
The Bell Witch is based on real events that sent a
cold shiver to your spine and make the hair on the back of your
neck stand. And cuandoo try to sleep tonight, just remember
that I warned about the Bell Witch.
As que in the movie "The Ring", once you see in the
dark, she looks back at you. Your life will never be the same
once you know about the Bell Witch and her thirst for more is
never shut off. Are you ready for a "true Ghost Story"?
According to legend, John Bell was the only person
recognized by any state have been killed by a spirit. The
legend goes back to the days of General Andrew Jackhijo in
early 1800. The story has a special interestfor me, because I
live in Tennessee. Nice to know the Bell Witch is not very
far!
How would you like to visit the location of the Bell
Witch of Tennessee? Bring your camera because you never know
what will. You can visit the cave hidden Bell Witch, which is
in the ownership of the Bell family disastrous.
Imagine being home alone at night and the lights were
dimmed. His relaxed and suddenly you hear a noise Rapping.
Then, you hear so bumps and scratchesnests, and nobody is
there. Have you ever heard strange noises while you when you
sleep? Perhaps some breathing at the corner of his room and
there was nobody there?
Lights in the dark and see what you think is a human
figure, or is it? It gets very cold and think that this dark
force presence on you. You know your not alone, you start
thinking your mind is playing tricks on you. Is it all in your
head?
You see a shadow of its esquinade eye, and you
know that is not very funny. He realizes that they are afraid
and can smell the fear. You want to run, but no where to run.
You want to scream, but it is too late.
Bell's family knew what terror and Mr. Bell tried to
keep secret. It is presented by the Bell Witch! She had to make
their voices heard and physically assaulted a family to make
their point!
According to the Bell Witch legend, the spirit of
Kate Batts terrorized family Bell. Cole's daughter with
the pins and pulling her hair. There were physical
manifestations and flying sheets off the beds. Again, what
makes this chilling is that it is not a fictional story or a
Stephen King bestseller, is a true Ghost Story. "
The legend of the Bell Witch is a part of history and
are just as curious as I was looking for more answers to this
"True Ghost Story." Perhaps a visit to Adams, Tennessee, why
not see if you can touchr the presence of mysterious Bell Witch
pa meetings, and if fate allows maybe more.
The new owners have reported strange and ghostly have
heard unexplained sounds. Imagine taking a tour and hearing
mysterious sounds from the hidden corners of the cave. Image
with a camera and take pictures that just happened to catch a
shadow figure in the camera.
Just think, you could experience the past of this
"True Ghost Story. Imagine the look of your friends' faces, to
tell this story around a campfire.
In fiprimer part of this project is discussed on how
to begin to make a bell tower of the mark to hit the windows of
the structure together. Steps to address the first part is only
the basis for the preparation of the second part is more
painting and beautification of the bell tower. Regardless, this
is the continuation of the proposed tower dthe belfry. So do
not worry if the last article of its draft was not final. Start
the job by going
Step 1 Cut Base
After cutting waves windows are not going to cut a
basis for the walls have something to stick a. You may only
made large enough to fit two Space Marines along the outside of
the building once in place.
Step 2 Glue popsicle sticks
Start by cutting the stickspallets in the wide
channels of each level. Next glue sticks depending on pallets
instead. These will give adequate support to the structure when
it is united and in order. Once all the gluing popsicle sticks
allow to sit for 5-10 minutes to dry.
Step 3 Glue structure
This is where we broke up floors. Do what they can
rest on two walls of greater support. Keep the walls
perpendicular to sí and glue on the floor until it dries. This
will allow the building beside himself. Make sure the wall can
get up by himself. Next queue supports the base. Use windows
that were cut from the walls.
Step 4 of the structure
Using black acrylic paint on the building when it
goes to the base of the building. Its better to include in the
painting beneath the floors so if you want to take a picture of
it is an art.
Step 5 Building base of the roofs
Cut a base that fits the roof with the side walls.
After the cutting of the roof of the base of the tail to the
base of the walls.
Step 6 Glue-based decorative pieces
This step is the beauty and the feature to the base.
You can use the windows of the walls that cut into the fiprimer
part of the project. Glue adequately to the base in any way you
want. Then leave to dry.
Pa7 roof so paint base
Black acrylic paint is also used in paint to the
base. Make sure it is strong and can stand on its base in the
paint before you begin.
Step 8 Create walls of the tower top
These walls will be used for the area of the bell. Be
sure to share the large windows in the walls so you cadiz
clearly outside of the bell. Dañarun if you want a little torn.
In fournt I like doing new aspect of the structure is not as
boring as the perfect touch in buildings.